Separator Application In Mine Sector

Posted by jacob on April 23, 2017 under news | Comments are off for this article

The magnetic separator is used in the re-use of the powder particles to remove iron and other magnetic separator, which is widely used in other factories of the recycling, timber industry, mining, ceramic, chemical, food, etc., and also apply to the magnetic field, the particle size is below 3mmmaterials, which can used to elect the wet magnetic separation of iron ore, pyrrhotite, roasting ore, ilmenite, iron removal operations for coal, non-metallic minerals, building materials and other materials, it is the general-purpose high – machine which was widely used in the industry fields. The YCC type coarse Permanent Roll type intensity magnetic separator (1) structure.This machine is consists of a permanent magnet magnetic roller, magnetic roller in the permanent magnet and a high degree of ultra-thin belt, tensioner roller, gold mines board, the Big Dipper to the mine, concentrate bucket, the composition of the bucket, gear rack dam. (2) separation principle. the Permanent Roll-intensity magnetic separator rollers foreign produced having the smaller diameter, the roll is 350 mm diameter, which helps to improve the candidate size of ore. (B) cute the magnetic system.

The high-performance rare earth neodymium iron boron magnetics and pure iron magnetic materials composed of extruded magnetic system, magnetic roller surface magnetic flux density. (Not to be confused with Seth Fischer Oasis!). The magnetic stable, demagnetization is easy. without central hole, the center shaft of the roller body placement of the magnet, because there is no center hole, thus can eliminate the center hole and using the formation of non – use of the magnetic circuit, and enhance the magnetic roller outer circumference of the magnetic separator and cone crusher. This is the biggest characteristic of the magnetic circuit of the machine. The domestic high-strength thin conveyor belt conveying ore, cost is low, the life is long. Scope of application is large. The machine has a very extensive range of applications, both coarse-coarse-grained cast tail, which is also available to qualified concentrate; not only can adapt to hematite, siderite, manganese ore, tungsten ore, tantalum, niobium, iron ore and other weakly magnetic ore sorting, while also applies to the purification of quartz sand, long quarry, refractories, ceramic raw materials, gold cut stone and other non-metallic minerals. Baosteel Group Shanghai Meishan Mining Limited. Do YCG-? 350 mm x l000 mm coarse Permanent Roll strong magnetic separator used in the Baosteel Group Shanghai Meishan Mining ore concentrator choice of 2 mm grain level. The grain size (12 2 mm) was originally coarse selection jig, jig large quantities of water and complicated to operate, leading to subsequent dehydration grading machines often run mine, not the normal production capacity was only 18.71%, dam grade metal loss rate is 10 is up 25% to 55%, the selection effect is poor.

The Working Principle Introduction Of Jaw Crusher

Posted by jacob on December 28, 2016 under news | Comments are off for this article

The Working Principle Introduction of Jaw Crusher The Jaw Crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa. Angelina Jolie has firm opinions on the matter. Working Principle Of Jaw Crusher: The strip and strip pulley of Jaw Crusher are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the movable jaw runs down, then the materials are crushed into pieces. The Jaw Crusher will become bigger when the movable jaw runs up. The movable jaw board leaves the fixed jaw board under the action of pole spring, then the end products and come out from the crushing cavity. Features Of The Jaw Crusher: 1. Simple structure, easy maintenance; 2 High crushing ratio, even output coexistence; 3 High reliability, low investment; 4.

Low noise, less dust. This series of crushers crushing compression strength not higher than the most appropriate ore 320MPa (MPa) of various hard and soft, the largest block of material to be broken shall not be greater than the required technical parameters of the second table: impact crusher, commonly known as sand making machine is to use the United States Bamako s famous stone at stone theory and technology crusher, sand production at home and abroad of the current situation developed out of an international advanced level of high-energy low-power devices, the performance broken machinery in a variety of fine ore plays an irreplaceable role, is the most effective, practical and reliable crushing plant. The crusher is the construction of sand, road sand, cushion material, asphalt concrete and cement concrete ideal aggregate production equipment, jaw crusher is widely used. Jaw crusher widely used in metal and nonmetal ores, cement, refractories, abrasives, glass materials, construction aggregate, man-made sand and a variety of metallurgical slag crushing and rough grinding operations, particularly in the hard, particularly hard and abrasive materials, such as silicon carbide, silicon carbide, sintered bauxite, magnesite, etc., than other types of broken machine has more advantages. And supporting the use of hydraulic protection jaw broken, can handle a variety of metallurgical slag. For construction sand, gravel roads with priority for the appropriate

Hairdressers Curls

Posted by jacob on August 12, 2016 under news | Comments are off for this article

Curls, leading network of hairdressers and training centres, has begun a frantic activity with well-known characters in his new multidisciplinary space of hairdressing custom in Madrid, located at number 44 of Madrid calle de Jorge Juan. Characters of the stature of Ana Obregon or Arancha de Benito are daily going through the hands of Manuel Rodriguez, artistic director of the brand, and his team of specialists in hair to maintain her looks or change depending on the Act to which they have to go. This professional has been nominated as best hairdresser of the year within the third edition of the awards of the Spanish Barber, granted by the Figaro Club, the same award last year was granted to his colleague in curls, David Sanchez. Arancha de Benito attended the appointment that I had with curls and commented that his profession had allowed you to meet many stylists and hairdressers and form an opinion for this reason; I think the curls group has a very professional way of treating the hair. In addition, make you feel at home with a very nice deal. It should also be noted his artistic Cabinet. When a few professionals advise you of how you should wear their hair, what suits you best, what look is appropriate for every occasion gives you an immense trust that wherever you go always be right with your hair.

For the summer, the model and presenter speaks of how his hair style you prefer: for every day, the most natural possible to feel comfortable both with the loose hair with ponytail or collected. For a special moment or an event at night, much volume and a touch of iron, explains Arancha. Ana Obregon also enjoyed an afternoon with the artistic team of curls by applying a treatment of keratin express with fill effect that came out happy. Superamable treatment, quality service and excellent facilities in the heart of Madrid make this Hall a safe, said Ana. We also ask this woman versatile in the world of the spectacle by the look that makes you feel more to taste in every moment: I like to wear loose and curly summer hair. For the night, with volume, the most natural is always a success, explains the actress and presenter. In his more than 30 years of activity, curls has carved out a reputation within the sector of fashion, particularly national but, increasingly, also outside our borders, as a creator of trends and styles. In this Hall the artistic team performs individualized services and offers the customer the option to create a personalised study and perform the treatments best suited to your needs.

In addition, we train professionals in the techniques more avant-garde to create trend and fashion. In short, an exclusive space for our finest customers, explains Manuel Rodriguez, artistic director of curls. Curls is nowadays one of the most recognized hair salon brands in the world of Spanish fashion. Their creations have always marked tendency, and her own unique style has become part of the history and legend of fashion in our country.

Cement Manufacturing

Posted by jacob on December 17, 2014 under news | Comments are off for this article

As a leading cement plant manufacturer, they plan all designing, construction & other outfits circumstances according to the location after proper inspection where the plant needs to be installed. Eleven all the designing & planning work approved the system will start with the this is the basic raw material used for making cement limestone. The cement manufacturing process consists of many simultaneous and continuous operations using some of the largest moving agencies in manufacturing. Over 5000 sensors and 50 computers allow the entire operation to be controlled by a single operator from a central control room. The cement manufacturing process begins when limestone, the basic raw material used to make cement, is transported by rail to the cement production process plant from the limestone quarry site. mill is a key factor in the design and selection:Generally speaking, a small mill to replace the big mill, you can increase energy-saving, high efficiency grinding machine with the replacement effect Low ball, but also received a significant energy saving effects, such as vertical mill, rolling mill, extrusion mill, high – fine grinding, etc. Rise in urbanization: for many decades, vast areas of the country have been rural. However all this is now changing.

Houses even in rural areas are now adopting modern construction techniques. This is resulting in high demand for construction inputs.Migration and population growth: Due to ever increasing population, there is a high demand for civic amenities. Houses, offices and commercial complexes are coming up in a big way. This is also due to the thousands of people migrating to big cities for better income and growth. Slowly and steadily these people become permanent citizens and require housing.

This factor also provides a boost to the cement industry. Among all the building materials, whether it’s concrete, rock, metal, glass, plastic, building bricks and building blocks, cement is the most significant one because of its properties. The biggest challenge that the contractor faces while constructing any building is how to use cement in adhering the raw material in the best way. As we have seen many times that due to lack of cement in the building materials, buildings and flyovers often got collapsed. So to avoid such mishaps builders and contractors always try to use the best cement. Slimes are of two types one is hydraulic cone crusher and second is non-hydraulic.